
Our video loss detectors will monitor a camera signal and upon video loss triggers a relay to trip a device of your choosing. Numerous possibilities including alarms, sirens, shutting off gas pumps, etc.. Our Video loss detectors are available in single or 4 channel models.
As your video surveillance system grows, multiple video loss detectors can be used together in combination. If there are multiple cameras at a site, use the four input model and add addtional models, single or multiple.
The video loss detectors can be used with any VCR or DVR solution. No compatibility issues! Can be Installed in older cctv installations or new installs. Easily setup in seconds. Dry contact outputs for normally open or closed loops, with jumper option for powered output (equal to your input power supply in the 8-20 VDC range).
- Four channel unit (SKY-VLOSS-4) can utilize one power supply!
- Monitor 1 v p. to p. signals
- Normally open or normally closed with options for switched power or ground
- When video loss occurs, relay can trip various outputs
- Adjustable pot. for setting how long video loss must occur before triggering the relay
- 1 year warranty
- Dry contacts FORM C relay(s)
- Remote software included to view multiple locations at once on one 'Live' screen
- 8 - 20 V DC operation
- Output voltage equals your input voltage (when jumpered to do so)
- Stand-alone units - use with any VCR, DVR Solution
|

Download the Video Loss Detector PDF
SKY-VLOSS-1
Single Channel
$175.00
SKY-VLOSS-4
4 Channel
$424.00 |
|